Performance Evaluation of Molecularly Imprinted Polymer using Propanol as Porogen for Atenolol Recognition in Human Serum

Meilia Suherman; Ike Susanti; Driyanti Rahayu; Rimadani Pratiwi; Aliya Nur Hasanah

doi:10.24198/ijpst.v6i1.18671

Performance Evaluation of Molecularly Imprinted Polymer using Propanol as Porogen for Atenolol Recognition in Human Serum

Meilia Suherman, Ike Susanti, Driyanti Rahayu, Rimadani Pratiwi, Aliya Nur Hasanah

Abstrak

Atenolol is a cardiovascular drug that has a narrow therapeutic index with long-term use and it’s often used as doping. Atenolol has a small concentration in human boby and it’s in biological matrix (serum) so in the testing need a selective extraction so the analyte can be pra-concentration and removed from matrix. Two molecularly imprinted polymers (MIPs) on propanol as porogen have been made with two different methods i.e. bulk polymerization and precipitation polymerization. The polymer was made using atenolol as a template, methacrylic acid as a functional monomer, and ethylene glycol dimethacrylate as a crosslinker. Prformance evaluations showed that polymers from bulk polymerization provide better performance than polymers from precipitation polymerization when tested against standard solution. However, this sorbent has low recovery percentage after applied into serum sample and could not be used as alternative for atenolol extraction in human serum.

Key words: Molecularly imprinted polymer, Atenolol, Solid Phase Extraction, Preparation method, propanol.

Teks Lengkap:

PDF

Referensi

Damiani PC. Determination of atenolol in human urine by emission-excitation fluorescence matrices and unfolded partial least-squares with residual bilinearization. Talanta. 2011;85(3):1526–34.

Goryński K, Kiedrowicz A, Bojko B. Development of SPME-LC–MS method for screening of eight beta-blockers and bronchodilators in plasma and urine samples. J Pharm Biomed Anal. 2016;127:147–55.

Martín-Esteban A. Molecularly-imprinted polymers as a versatile, highly selective tool in sample preparation. TrAC - Trends Anal Chem. 2013;45(1):169–70.

Song S, Wu A, Shi X, Li R, Lin Z, Zhang D. Development and application of molecularly imprinted polymers as solid-phase sorbents for erythromycin extraction. Anal Bioanal Chem. 2008;390(8):2141–50.

Hasanah AN, Suryana S, Mutakin, Rahayu D. Different Polymerization Method for Atenolol Recognition in Human Plasma. 2017;29(11):2429–33.

Thordarson P. Determining association constants from titration experiments in supramolecular chemistry. Chem Soc Rev. 2011;40(3):1305–23.

Chen CY, Wang CH, Chen AH. Recognition of molecularly imprinted polymers for a quaternary alkaloid of berberine. Talanta [Internet]. Elsevier B.V.; 2011;84(4):1038–46.

Ansel RJ. Induced pluripotent stem cell technology in regenerative medicine and biology. Springer Int Publ. 2015;123(July 2015):127–41.

Umpleby RJ, Baxter SC, Rampey AM, Rushton GT, Chen Y, Shimizu KD. Characterization of the heterogeneous binding site affinity distributions in molecularly imprinted polymers. J Chromatogr B Anal Technol Biomed Life Sci. 2004;804(1):141–9.

Storch CH, Hoeger PH. Propranolol for infantile haemangiomas: Insights into the molecular mechanisms of action. Br J Dermatol. 2010;163(2):269–74.

Shekarchi M, Pourfarzib M, Akbari-Adergani B, Mehramizi A, Javanbakht M, Dinarvand R. Selective extraction of lamivudine in human serum and urine using molecularly imprinted polymer technique. J Chromatogr B Anal Technol Biomed Life Sci [Internet]. Elsevier B.V.; 2013;931:50–5.

FDA. Analytical Procedures and Methods Validation for Drugs and Biologics. Guid Ind. 2015;(July):1–15.

DOI: https://doi.org/10.24198/ijpst.v6i1.18671