Analysis of Waste Minimization in Production Time to Increase Production Effectiveness

Nalia El-Huda Ismail; Andri Nugraha Nugraha Sutomo; Muchtaridi Muchtaridi

doi:10.24198/ijpst.v10i1.34905

Analysis of Waste Minimization in Production Time to Increase Production Effectiveness

Nalia El-Huda Ismail, Andri Nugraha Nugraha Sutomo, Muchtaridi Muchtaridi

Abstrak

Lean manufacturing has been widely applied in the industry as an effort to utilize resources efficiently
and systematically. The purpose of this study is to analyze waste time activities and to proposed
minimize the time so it will increase the effectiveness of production sucralfate suspension at PT. X.
The concept used in this research is lean manufacturing with a value stream mapping (VSM) approach.
This method will make it easier to identify waste time activities through current state mapping, to
determine improvement points and to propose improvements by describing the value stream mapping.
The research was carried out by calculating and mapping each step of the production of sucralfate
suspension. The total production time needed for the production of one batch of sucralfate suspension
is 5 hours 16 minutes with a value added activity time about 96%, and a necessary non value added
activity time about 4%. The proposed improvement to minimize waste time is by carrying out
productions activities in parallel. Based on the proposed improvement, the total production time of
sucralfate syrup that can be reduced is 31 minutes.

Keywords: Waste Time, Value Stream Mapping.

Kata Kunci

Waste Time, Value Stream Mapping.

Teks Lengkap:

PDF

Referensi

Kale S V., Parikh RH. Leanimplementation in a manufacturing industry through value stream mapping. Int J Eng Adv Technol. 2019;

Liu Q, Yang H. Lean implementation through value stream mapping: A case study of a footwear manufacturer. In: Proceedings of the 29th Chinese Control and Decision Conference, CCDC 2017. 2017.

Zahraee SM, Hashemi A, Abdi AA, Shahpanah A, Rohani JM. Lean manufacturing implementation through value stream mapping: A case study. J Teknol (Sciences Eng. 2014;

Shook J, Rother M. Learning to See:Value Stream Mapping to Add Value and Eliminate Muda (Lean Enterprise Institute). Lean Enterprise Institute Brookline. 1999.

Rusmawan H. Perancangan Lean Manufacturing Dengan Metode Value Stream Mapping (VSM) Di PT Tjokro Bersaudara (PRIOK). J Optimasi Tek Ind. 2020;

Armyanto HD, Djumhariyanto D, Mulyadi S. Penerapan Lean Manufacturing dengan Metode VSM dan FMEA untuk Mereduksi Pemborosan Produksi Sarden. J Energi Dan Manufaktur. 2020;

Arbelinda K, Rumita R. Penerapan Lean Manufacturing pada Produksi Itc CV. Mansgroup dengan Menggunakan Value Stream Mapping dan 5s. None. 2017;

Octaviany IN, Yanuar AA, Rendra M. Penerapan Lean Manufacturing Untuk Meminimasi Waste Waiting Pada Proses Produksi Hanger Sample Di CV. ABC Offset. J Rekayasa Sist Ind. 2017;

Marin-Garcia JA, Vidal-Carreras PI, Garcia-Sabater JJ. The role of value stream mapping in healthcare services: A scoping review. International Journal of Environmental Research and Public Health. 2021.

Sundar R, Balaji AN, Satheesh Kumar RM. A review on lean manufacturing implementation techniques. In: Procedia Engineering. 2014.

Sari KP, Yanuar AA, Rendra M. Penerapan Lean Manufacturing Untuk Meminimasi Waste Waiting Time Pada Proses Produksi Spring Guide XXX Di CV. Gradient. J Rekayasa Sist Ind. 2017;

Manjunath M, Shiva Prasad H, Keerthesh Kumar K, Deepa P. Value stream mapping as a tool for lean implementation: A case study. Int J Innov Res Dev. 2014;

Langstrand J. An introduction to value stream mapping and analysis. Sweden Linköping Univ Electron Press 2016 , p 28. 2016;

Thirunavukkarasu S, Bheeman BV, Ashwin R, Varadharajan M, Devadasan SR, Murugesh R. Lean implementation through value stream mapping: A case

study in an Indian pump manufacturing company. Int J Serv Oper Manag. 2013.

Gupta, Vikas. Lean manufacturing: A Review. International Journal of Science Technology & Management. 3. 176-180. 2015.

Muniyappa, Manjunath & Prasad H C, Shiva. Value Stream Mapping: A Lean Tool. The International Journal of Busniess Management. 02. 100-104. 2014.

Chaple, Anup & Narkhede, Balkrishna. Value stream mapping in a discrete manufacturing: A case study. 6. 55-67. 2017.

Gokulraju R, Vigneshwar K, Vignesh V. A Case Study on Reducing the Lead Time and Increasing throughput by using Value Stream Mapping. International Research Journal of Engineering and Technology. 2016.

Centeno, Fiorella & Huayanay, Wininger. Lean Manufacturing: Literature review and implementation analysis. Journal of Scientific and Technological Research Industrial. 3. 36-46. 2022.

Nenni ME, Giustiniano L, Pirolo

L. Improvement of Manufacturing Operations through a Lean Management Approach: A Case Study in the Pharmaceutical Industry. International Journal of Engineering Business Management. 2014;

de Oliveira, R.I., Sousa, S.O. & de Campos, F.C. Lean manufacturing implementation: bibliometric analysis 2007–2018. Int J Adv Manuf Technol 101, 979–988. 2019.

Naeem, M., Ahmad, N., Hussain, S., Nafees, B., & Hamid, A. IMPACT OF LEAN MANUFACTURING ON THE OPERATIONAL PERFORMANCE: EVIDENCE FROM TEXTILE INDUSTRY. Humanities & Social Sciences Reviews, 9(3), 951-961. 2021.

DOI: https://doi.org/10.24198/ijpst.v10i1.34905